Farmers warned felling licences taking a year to process – IFA

2014-10-21_bus_3962775_I1 (1)

Forestry felling licenses are taking up to a year to process farmers are being warned by the IFA. National Farm Forestry Chairman, Pat Collins said that the latest IFA Timber Price report shows that palletwood prices have increased by up to 15pc since February, while average sawlog prices are in excess of €85/tonne. Pat Collins said, “With demand for timber predicted to remain high at a domestic and global level, it is a good time to consider forestry. There are several options available under the Afforestation and Woodland Creation scheme to suit the soil, size, location and management objectives”.

He said that the size of a viable forest from a timber perspective is very location specific, for example a small forest that is near a road and easy to work can generate comparable timber incomes per hectare as a larger forests, particularly if managed as part of a harvesting cluster. “For those who have already planted, but who have not managed the forest or have timber in hard-to-access locations – now is the time to have your asset valued and look at realising a good price”. A farmer is legally required to apply to the Forest Service for a felling license before they can fell a tree in his plantation. If you are planning to apply for a felling licence, approvals can take up to 12 months to issue.

“Farmers are very concerned with the delays in getting felling licence approval”, said Mr. Collins. “The introduction of a single 10 year felling licence and the new public consultation process, although welcomed, is causing further delays”. He said that the Department must work to reduce the turnaround time for felling licence approvals so farmers can avail of the strong timber prices.

https://www.independent.ie/business/farming/forestry-enviro/forestry/farmers-warned-felling-licences-taking-a-year-to-process-ifa-36945543.html

Advertisements

Advice Notes on Biomass CHP Technology Economics for the NPA Region

Biomass CHP

The Advice Notes aim to provide introductory material for entrepreneurs, startups and SME’s, considering to enter into the renewable energy sphere and based in the NPA regions partners to GREBE. The scope of the Advice Note covers regional, trade and industry, renewable energy (RE), technology information from Ireland, Northern Ireland, Scotland, Iceland and Finland. Different partner regions have different level of deployment of the various RE technologies covered by the Advice Notes. Thus, the level of information will vary depending on the level of deployment for each technology. For example, wind is not deployed on a large scale in North Karelia (Finland); however, it is widely deployed in Scotland, Ireland and Northern Ireland.

Full details are available on the GREBE website:

http://grebeproject.eu/wp-content/uploads/2018/04/GREBE-Advice-Notes-biomass-chp-2.pdf

The focus of the Advice Notes is on regional information of some of the main economic characteristics sited as imperative, when making an informed choice, regarding which RE technology may be the optimal choice for a new business venture:

  • Costs and economics associated with the relevant technology
  • Support schemes available, relevant to the technology
  • Government allowance/exemptions, relevant to the technology
  • Funding available for capital costs of the relevant technology
  • List of the relevant to the technology suppliers/developers, with focus on local/regional, suppliers/developers and the products and services they offer.

Combined heat and power (CHP) is a method that delivers both heat and power on site in a single, highly efficient process, normally over 80% efficiency. CHP creates electricity and as a by-product of the generation process it produces heat. Wood biomass is fed into the CHP system similar to a normal biomass boiler and the produced gas is then fed to an engine which is connected to a generator generating electricity while the heat produced, can be fed into a heating system. Biomass is the world’s fourth largest energy source, contributing to nearly 14% of the world’s primary energy demand.

Small scale (<100kW) and micro-scale (<15kW) biomass CHP are particularly suitable for applications in commercial buildings, such as hospitals, schools, industrial premises, office building blocks, and domestic buildings. Optimum system design and implementation is crucial for cost-effective operation and it is established that the best economic performance come about with high load factors when the maximum amount of both electricity and heat sold on-site is maximised.

 

Power from Biomass project final seminar, Monday 11th June, Joensuu

KUAS

The Rural development programme co-financed Power from Biomass project completed its work in June 2018 after three years of renewable energy development in North Karelia, Finland. The project cooperating closely with GREBE in North Karelia, resulted in several new investments including two solar PV and energy storage systems in community buildings of Höljäkkä and Haikola in Nurmes. Project also established a regional network of 15 renewable energy demonstration sites.

The final seminar held in Joensuu, presented projects main outputs, latest developments in renewable electricity production, biomass-based small-scale combined heat and power, solar energy project of heat enterprises, and intelligent solar PV systems.

Project manager Antti Niemi from Pielinen Karelia Development Company PIKES Ltd. summarized the project results. The project established a regional demonstration network with 15 sites demonstrating renewable energy production systems. The Energiaraitti website presents the technical and economic information and live-information of solar PV systems. New production units established were mostly solar PV and some energy storages systems in farms, other rural enterprises and community buildings. The biomass-based renewable energy had a challenging business environment due to low price of fossil fuel oil. Despite, also some new biomass-based energy systems were established.

Project manager Kim Blomqvist from Karelia UAS presented the solar PV systems integrated into biomass-based district heating plants. Investments were made for 7 district heating plants with total annual production of 52 MWh. The heating plans were considered suitable for the solar PV as they have balanced electricity demand.

Marketing and product development manager Kimmo Tolvanen, representing regional energy company PKS, presented an in-depth overview of the energy system development in Finland and North Karelia. The main game changers in the energy system are expected to consist of wind and solar power production, energy storages and digitalization working all effectively together. The energy grid changes toward decentralised, intelligent and adaptive systems are evident. In addition, electricity markets are in transition, and new service developments are expected throughout the system from production to consumption.

Project coordinator Anssi Kokkonen from Karelia UAS presented the technical solutions of biomass-based combined heat and power production. The solutions included woodchip gasification plant (Volter Ltd.), Nano-chp Stirling engine (9 kWth + 0.6 kWe), fuelled by wood pellets (Ökofen).  Both solutions are demonstrated at Sirkkala Energy Park by Karelia UAS.

Project manager Toni Hannula from energy company ESE (Etelä-Savon Energia, Mikkeli) presented intelligent solar power systems. The smart energy transition project by Lappeenranta Technological University has generated an overview of the systems change. The ESE has been successful in establishing biogas fuel stations, and piloting intelligent solar PV systems with 48 hours production forecast and directing the production optimally depending on energy price (electricity spot-price optimizing) and production and consumption loads. The system is piloted in Lumme Energia Oy estates.

The Power from Biomass project developed as a diverse renewable energy project and delivered several new services and RE production sites were established. The project had an international element through cooperation and networks of the GREBE project.

LUKE investigates alternatives to side-stream utilisation of Woodpolis Timber Cluster

LUKE1

Natural Resources Institute Finland (LUKE) made a survey on the alternative uses of side streams of wood processing in Woodpolis industrial area in the City of Kuhmo. Woodpolis Timber Cluster consists of Kuhmo Ltd.’s large saw mill and some ten SME companies specialised in further processing of sawn timber and side-streams of wood processing. A good example of new growing industries in the area are CLT, cross laminated timber and element factories producing prefabricated building products for multi-storey and one-storey buildings, such as residential, office, school and kindergarten houses.

In addition to saw mill chips supplied to pulp mill, versatile side streams from saw dust and bark to massive left-over pieces of log house and CLT construction are produced in the area. In 2015, of the total amount of 475,000MWh of bioenergy from the side streams 376,000MWh was used at the local CHP plant or for the briquette and pellet production, and 99,000MWh was sold to other CHP plants in Northern Finland. However, oversupply of wood chips and pellets for bioenergy as well as long transport distances reduce the profitability of selling the entire excessive bioenergy fraction. Increase of pellet or briquette production is not seen very profitable either. Therefore, new ways of utilizing side streams are actively sought.

The most technically challenging side-stream fraction is CLT leftover pieces because of their variation in shape, dimensions and chemical composition. Once the product is piled up with gluing, chipping it back to bioenergy or bio-refinery fractions is not easy or reasonable. New ways of utilizing them are sought from packaging and wood panel industries. If chipped, semi-finished products for manufacturing of for example wood-plastic composites should be given preference over bioenergy uses.

LUKE2

Bioethanol production would be a feasible step in the further processing of more advanced biofuel products from saw dust, planer shavings and bark. Biochar production for purposes which require bioactivity from the char, or for metallurgic processes may also provide promising options. In addition, saw dust and bark contain extracts some of which are already in the markets: for example, pine tar, turpentine, pyroligneous acid, and adhesives. However, bio-refineries (e.g. bioethanol plants) usually require large amounts of raw materials to be technically feasible and economically profitable, much more than what is generated now in Woodpolis industrial area.

Probably, the best potential for local bio-refinery production would be in high priced bioactive compounds or upgraded raw materials intended for uses like in health products, cosmetics, or food products. In all cases, new bio-refinery production in the Woodpolis area requires investments and operating capital, and attraction for new initiated entrepreneurship. There are no ready-made solutions for a new bio-refinery production. Technical implementation must be planned and tested on a realistic raw material basis and market perspective with a convincing proof-of-concept before the start of a full scale production. If they are realized, the new large-scale bio-refinery projects going on in Northern and Eastern Finland, St1’s bioethanol factory and KaiCell Fiber’s pulpmill and related bio-refinery activities being the closest, may increase quickly the demand of the side-streams generated in the Woodpolis industrial area.

The entrepreneurial community of Woodpolis Timber Cluster has worked together for a long time, which has enabled the refinement of joint development work and common practices. Therefore, Woodpolis can offer an example for other wood-based industrial clusters of the same kind about good practices, collaboration between SMEs and large companies regarding cooperation and new options to acquire and market raw materials, as well as product and service development activities.

Entrepreneur Enabler Scheme EES Roll–out completed successfully in Finland

KUAS

The roll-out of the GREBE EES in North Karelia took place in February-April. Three companies Eno Energy Cooperative, Rajaforest Ltd. and Havel Ltd. attended in mentoring sessions together with the Spiralia Ltd. – an experienced SME mentoring and consultancy. The results of the EES were positive: there was initiation of new business cooperation, business plan development for a new innovative technology, introduction of LEAN quality management principles, among others.

Eno Energy Cooperative is in a phase of business renewing and thus the focus was in creating and diversifying collaboration with other energy enterprises. These discussions identified opportunities to cooperate in acquisitions and raw material procurements, and potential of additional business activities in wood fuel sector. Rajaforest Ltd. had a technology development case on biomass drying and received support in business planning. Havel Ltd. Benefited from information on renewable alternatives for plastic raw materials, as well as introduction of LEAN quality management in production.

The EES process was rolled-out successfully as it resulted in new collaborations and business activities. The process, developed in GREBE project, will be further adopted for regional use in North Karelia. It was identified that there is still further work to do to establish stronger mentor networks, develop orientation guidance for attending businesses, disseminate the scheme for larger audience, and establish funding base for the service. One potential continuation is to integrate the EES into a new regional renewable energy research and development project prepared by the Karelia UAS and Finnish Forest Centre.

The GREBE project meets in Thurso, Scotland in May 22nd-24th, which provides a unique opportunity to share the EES roll-out experiences between the NPA Programme regions.

GREBE publishes its eight project e-zine

Ezine No8 Front Page

The GREBE Project has published its eight e-zine to showcase the activities and ongoing goals of the project.  

Since December we have continued to carry out the project activities and meet our objectives. Our 8th partner meeting in Kokkola was hosted by LUKE & Karelia UAS, and included a visit to the Vaasa Energy Week for attending SME’s. The aim was to highlight the benefits of renewable energy for SME’s and start-up businesses, and also give participants the opportunity to meet with biomass experts from the Natural Resources Institute in Finland. Details can be found on Page 3.

The two case reports on the transfer of technology and knowledge in the NPA have now been completed and further details are on Page 4. We also have details of the 5.2 Report (Advice Notes) on Page 7. Details of both can be found on the publications page of our website http://grebeproject.eu/publication/.

The GREBE Industry Advisory Group (IAG) held its third annual meeting in Finland and was organized by LUKE. Further details are on Page 3. The Environmental Research Institute held an important workshop for the further development of Orkney’s Hydrogen Economy. Details can be found on Page 5. We also have an update of EES in partner regions on Page 8.

We have a number of upcoming events and will hold our final partner meeting in Thurso in Scotland in late May. We will hold our final conference ‘Local opportunities through Nordic cooperation’ in Thurso on Thursday 24th May 2018. Details can be found on Page 9. Action Renewables are holding a GREBE conference in Belfast on Thursday 21st June and details can also be found on Page 9.

Regional Heat Study Workshops – Tuesday 15th May (Ballinasloe) & Wednesday 16th May (Ballybofey)

GREBE - WDC Regional Biomass Study Workshops - May 2018

The Western Development Commission (WDC) commissioned a regional renewable energy analysis on the use of biomass as a local contribution to the national renewable heat target and develop a range of actions to support the development of renewable energy in the region under the Action Plan for Jobs.  

The aim of this study is to inform how the WDC can support and develop biomass use in the Western region.  This study is now complete and RE:HEAT will present their findings in two workshops.

Tuesday 15th May, 2.00pm at the Shearwater Hotel, Ballinasloe, Co. Galway

Wednesday 16th May, 10.00am at Jacksons Hotel, Ballybofey, Co. Donegal

Participants will have the opportunity to engage with RE:HEAT consultants during the workshop and informally during the workshop lunch.

Agenda for Ballinasloe (Tuesday 15th – afternoon session)

Agenda1

Agenda for Ballybofey (Wednesday 16th – morning session)

Agenda2

Register your interest in attending via email to tomasmahon@wdc.ie or paulineleonard@wdc.ie or by phone to the WDC offices at +353 94 986 1881.  Closing date for registration is Thursday 10th May 2018.  While these events are free of charge, registration is required.

A summary of this report can be found here